Screen Control
Start > Settings > Control Panel > Screen Control
Set screen properties for the Thor VM1.
Factory Default Settings
Screen Blanking (Blackout)
Enable screen blanking
Screen on delay (ms)
COM Port
Current Level
LCD Brightness (%)
Ambient Light (%)
Automatic Brightness Control
Enable automatic brightness control
Low to medium light level (%)
Medium to high light level (%)
Note:
If Automatic Brightness Control is enabled for an outdoor display, the value for LCD Brightness
depends on the Ambient Light %.
Note:
There is no default value for Ambient Light % as it varies depending on the level of light where the
Thor VM1 is located.
Disabled
100
COM1
100 (see note)
(see note)
Disabled
25%
75%
3-147