Powerware 9315 Installation & Operation Manual page 32

CAUTION:
As shipped, the Powerware Sync Control is setup for
operation with a Powerware Hot Sync---Capacity system.
For operation with a single module Powerware 9315 UPS
system, the jumper between terminal points TB1---40 and
TB1---41 must be removed. Removal of this jumper must
be performed by an authorized service person. Removal or
installation of this jumper by anyone but an authorized
service person may damage the equipment and/or critical
load and void the warranty.
A ---4
FIXED MASTER SYNC CONTROL ENCLOSURE
FRONT VIEW WITH DOOR OPEN
EQUIPMENT
GROUNDING
TERMINAL
DESCRIPTION:
FIXED MASTER SYNC CONTROL
DRAWING NO:
164201325---1
JUMPER
TB1
SHEET:
Powerware 9315 Fixed Master Sync Control
164201325 Rev. A 060203
3 of 3