Configuring The Inverter Using The Solaredge Configuration Tool - SolarEdge Power Harvesting System Installation Manual

For three phase inverters
Table of Contents

Advertisement

SolarEdge Installation Guide for Three Phase Inverters – EU – Version 1.5
Configuring the Inverter Using the
SolarEdge Configuration Tool
Two options are provided for configuring the system:
Using the LCD panel, as described in this guide.
Using the SolarEdge configuration tool, which provides a standard
Windows GUI. This tool can be accessed by connecting a computer or
laptop to the inverter through the RS232 connector.
This tool provides several additional options than are not accessible
using the LCD manual, such as enabling a firmware upgrade of the
inverter and retrieving a list of the serial numbers of the power
optimizers connected to the inverter for quickly verifying that all power
optimizers have been installed properly. You may refer to the
SolarEdge Configuration Tool Software Guide.
Inverter User Interface
74

Advertisement

Table of Contents
loading

Table of Contents