Table of Contents
Advertisement
12
SolarEdge Inverter
Each power optimizer also transmits module performance data over the DC power line
to the inverter.
Two types of power optimizers are available:
Panel Module Add-on power optimizer – connected to one or more modules
Smart modules - the power optimizer is embedded into a module
SolarEdge Inverter
The SolarEdge inverter efficiently converts DC power from the modules into AC power
that can be fed into the main AC service of the site and from there to the grid. The
inverter also receives the monitoring data from each power optimizer and transmits it to
a central server (the SolarEdge monitoring platform; requires Internet connection).
Monitoring Platform
The monitoring platform enables monitoring the technical and financial performance of
one or more SolarEdge sites. It provides past and present information on the system
performance both at the system and module levels.
Supported AC Grids
The following figures illustrate grids that are supported by SolarEdge single phase
inverters. Refer to Setting Country, Grid and Language on page 41 ).
Ground connection is required for all grids, as described in Connecting the AC Grid to
the Safety Switch on page 37.
Note that in some cases L1 and L2 are not interchangeable. In these places, L1 and L2
locations appear in the drawing.
Figure 2: 240V AC grids supported by SolarEdge single phase inverter
Single Phase Inverter with HD-Wave Technology Installation MAN-01-00541-1.3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
