Configuring the Inverter Using the
SolarEdge Configuration Tool
Two options are provided for configuring the system:
Using the LCD panel, as described in this guide.
Using the SolarEdge configuration tool, which provides a standard
Windows GUI. This tool can be accessed by connecting a computer or
laptop to the inverter through the RS232 connector.
This tool provides several additional options than are not accessible
using the LCD manual, such as enabling a firmware upgrade of the
inverter and retrieving a list of the serial numbers of the PowerBoxes
connected to the inverter for quickly verifying that all PowerBoxes
have been installed properly. You may refer to the SolarEdge
Configuration Tool Software Guide.
SolarEdge Installation Guide for Three Phase Inverters – EU
Inverter User Interface
60