Cpc Signal Detection Incoming Set - Panasonic KX-TA1232 Programming Manual

[405] CPC Signal Detection Incoming Set

Description
Assigns the expected minimum duration of the Calling Party Control (CPC) Signal on
incoming outside calls. If this is programmed, the system disconnects the line when the CPC
Signal is detected.
Selection
• Outside line (CO) number: 01 through 12,
• Time (milliseconds): Disable (no detection) / 100 / 200 / 300 / 400 / 500 / 600
Default
All outside lines — 400 msec
Programming
1.
Enter 405.
Display: 405 CPC INCOMING
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:400msec
4.
Keep pressing SELECT until the desired time is displayed.
5.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all outside lines to one selection, press the
shows the contents programmed for outside line 01.
• You may disable CPC Signal Detection for an outside line.
• Program [415] CPC Signal Detection Outgoing Set is used to program CPC Signal
Detection for outgoing outside calls.
Features Guide References
Calling Party Control (CPC) Signal Detection
Programming Guide
General Programming
( =all outside lines)
key in step 3. In this case, the display
117