Doorphone Ringing Assignment -- Day / Night - Panasonic KX-TA1232 Programming Manual

General Programming
[607-608] Doorphone Ringing Assignment —— Day / Night
Description
These programs assign the extensions which will ring when a doorphone call is received during
the day and night modes. Programmed extensions are also allowed to open the door.
Selection
• Jack number: 01 through 32,
• Doorphone number: 1 through 4, four entries (max.)
Default
Jack 01 — All doorphones; Other jacks — no doorphone —— Day / Night
Programming
1.
Enter a program address (607 for day or 608 for night).
Display example: 607 DOOR SET DAY
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:1234
4.
Enter the doorphone numbers.
To assign no doorphone, press CLEAR.
To change the current entry, press CLEAR and enter the new doorphone numbers.
5.
Press STORE.
6.
To program another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all jacks to one selection, press the
the contents programmed for Jack 01.
Features Guide References
Door Opener
Doorphone Call
Night Service
160
( =all jacks)
key in step 3. In this case, the display shows
Programming Guide