General Programming
[201] Transfer Recall Time
Description
Sets the number of rings before transfer recall occurs. If a transferred call is not answered after
the programmed number of rings, the call returns to the original caller.
Selection
Number of rings: 0 through 48 (0=Transfer Recall disabled)
Default
12 rings
Programming
1.
Enter 201.
Display: 201 TRAN RECALL
2.
Press NEXT.
Display example: Time:12 rings
3.
Enter the number of rings.
To change the current entry, press CLEAR and enter the new number of rings.
4.
Press STORE.
5.
Press END.
Conditions
• Select "0" if Transfer Recall is not required.
• One ring is equivalent to five seconds.
• You cannot leave the entry empty.
Features Guide References
Call Transfer, Unscreened — to Extension
82
Programming Guide