Extension Programming; Class Of Service - Panasonic KX-TA1232 Programming Manual

General Programming

2.7 Extension Programming

[601] Class of Service

Description
Programs each extension for Class of Service (COS). The COS determines the call handling
abilities of each extension.
Selection
• Jack number: 01 through 32,
• COS number: 1 through 8
Default
All jacks — COS 1
Programming
1.
Enter 601.
Display: 601 COS #
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:COS1
4.
Enter a COS number.
To change the current entry, enter the new number.
5.
Press STORE.
6.
To program another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of eight Classes of Service. Every extension must be assigned to a
Class of Service and is subject to the COS Programming of programs [500] through [510]
and [991].
• To assign all jacks to one COS, press the
contents programmed for Jack 01.
152
( =all jacks)
key in step 3. In this case, the display shows the
Programming Guide