General Programming
[503] Call Transfer to Outside Line
Description
This program determines which Classes of Services (COS) are allowed to perform the Call
Transfer to Outside Line function.
Selection
• COS number: 1 through 8,
• Enable / Disable
Default
All COS — Disable
Programming
1.
Enter 503.
Display: 503 CALL XFER CO
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
• Program [601] Class of Service is used to assign a Class of Service to each extension.
Features Guide References
Call Transfer, Screened — to Outside Line
142
( =all COS)
key in step 3. In this case, the display shows
Programming Guide