Download  Print this page

Calling Party Control (cpc) Signal Detection - Panasonic KX-HTS824 Feature Manual

Hybrid ip-pbx.
Hide thumbs

Advertisement

The extension will be received an Extension Group call when the
status of the extension is as follows:
Idle
Receiving a call (Only when Call Waiting is enabled)
FWD All is enabled (Only Hunting group is selected)
When FWD is set in an Extension Group, calls follow the FWD
setting.
For the following features, the extension settings registered at the
head of the Extension Group are applied to the Extension Group:
FWD to trunk settings: Permission to FWD to a trunk.
TRS settings: Trunk call restriction.
Extension Groups are used for Call Pickup and Paging feature.
2.3.4 PBX Configuration—[2-4] Extension—Extension Group

3.1.13 Calling Party Control (CPC) Signal Detection

Description
The Calling Party Control (CPC) signal is an on-hook indication (disconnect signal) sent from the analog
Trunk line when the other party hangs up. To maintain efficient utilization of Trunk lines, the PBX monitors
their state and when CPC signal is detected from a line, it disconnects the line.
Conditions
CPC signal detection is programmable for incoming Trunk line calls,
and for outgoing Trunk line calls.
If a CPC signal is detected during a Conference call, that line is
disconnected, but the remaining parties stay connected.
If a CPC signal is detected during a call between a caller using the
DISA feature and an extension or an outside party, the line is
disconnected.
For CPC signal detection, enabling of detection and detection time
can be set for both the outgoing CPC signal and incoming CPC
signal.
CPC Signal Detection Time Outgoing
CPC Signal Detection Time Incoming
Conditions
PIL Reference
Conditions
3.1.13 Calling Party Control (CPC) Signal Detection
When the extension is received
an Extension Group call, the
FWD setting for the extension is
ignored. Refer to 3.1.9 Call
Forwarding (FWD)
If call distribution is selected for
Hunting group, Call Forwarding is
operated when all extensions in
Extension Group cannot receive
a call. (Only when FWD Busy/NA
is enabled)
Reference:
3.1.9 Call Forwarding (FWD)
3.4 Toll Restriction (TRS)/Call
Barring (Barring) Features
Reference:
3.1.8 Call Pickup
3.10.1 Paging
Note
Note
Feature Manual
37

Advertisement

Table of Contents

   Also See for Panasonic KX-HTS824

   Related Manuals for Panasonic KX-HTS824

This manual is also suitable for:

Kx-hts32

Comments to this Manuals

Symbols: 0
Latest comments:
  • avi Jun 07, 2017 07:46:
    kaushdlkas​h ash dkash dkjh kahsdk asdkjha dasd a alskdj asd asdlkkjh asdlkajsd
  • harinarayanmehta May 06, 2017 04:08:
    I AM LIKE THIS SYSTEM PLZ I WANT MANUALS
  • harinarayanmehta May 06, 2017 04:56:
    i am very instructed this system