Message Waiting Ring Interval Time - Panasonic KX-TA1232 Programming Manual

General Programming

[216] Message Waiting Ring Interval Time

Description
Sets the Message Waiting ring interval time for a single line telephone.
Selection
Time (minutes): 0 through 64
Default
0 min (no ring)
Programming
1.
Enter 216.
Display: 216 MW RING TIME
2.
Press NEXT.
Display example: Interval: 0 min
3.
Enter the time.
To change the current entry, press CLEAR and enter the new time.
4.
Press STORE.
5.
Press END.
Conditions
When the interval time is set to "0", the telephone does not ring for Message Waiting
notification.
Selecting the message waiting ring type, 3 quick rings or 2 normal rings, in program
[990] System Additional Information, Area 05 - Bit 11 is available. If you prefer soft ringing,
select "3 quick rings". In this case, there may be some kinds of telephones which do not ring.
Features Guide References
Message Waiting
96 Programming Guide