Call Forwarding; Calling Party Control (Cpc) Signal Detection - Panasonic KX-TA616 Installation Manual

3 Features

Call Forwarding

Allows an extension user to transfer incoming calls automatically to another extension or to
an external destination. The following types are available.
All Calls:
Busy or No Answer:
To an Outside(CO) Line: Allows an extension user enabled in program [607] to forward
Follow Me:
• Extensions which have already been assigned as
!
!
a forwarded destination cannot set the Call
Forwarding feature.
• If the Do Not Disturb (DND) feature has
already been set, setting the Call Forwarding
feature will cancel DND.
• If a call between 2 outside parties is established by the Call Forwarding – to Outside
(CO) Line feature, the duration of the call is determined by the system timer assigned in
program [205]. An alarm tone is generated to both outside parties 15 seconds before the
timeout. The call will be disconnected at the timeout.
• Required System Programming
[202] Call Forwarding Start Time
[205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit
[607] Call Forwarding to an Outside (CO) Line
• Related Feature Reference
Limited Call Duration
• Operating Instructions References
1.2 Proprietary Telephone Settings, "Customizing the Buttons on Your Telephone",
1.6 Before Leaving Your Desk, "Forwarding a Call (Call Forwarding)"

Calling Party Control (CPC) Signal Detection

The Calling Party Control (CPC) signal is a disconnect signal sent from the Central Office
for an outside call. The CPC signal detection is activated by programs [420] and [421].
Program [420] is for incoming outside calls, and [421] is for outgoing outside calls.
• Required System Programming
[420] Calling Party Control (CPC) Signal
[421] CPC Detection for Outgoing Calls
FWD/DND (Forward/Do Not Disturb) Button
All incoming calls are forwarded to another extension.
All incoming calls are forwarded to another extension when
the extension user does not answer within the programmed
time in [202] or when the extension is busy.
all incoming calls to an external party.
Allows an extension user to set the Call Forwarding – All
Calls feature from another extension.
C
3-5
Features