Station Hunting Type - Panasonic KX-TA1232 Programming Manual

[106] Station Hunting Type

Description
Used to enable or disable hunting and set the Station Hunting type for each extension group.
There are five Station Hunting types available: Circular, Terminating, Voice Mail (VM),
Automated Attendant (AA), Ring Group.
If circular hunting is assigned for a group, all of the extensions in the group are searched until
an idle one is found. If terminating hunting is assigned, searching stops at the extension which
has the largest jack number in the group. If VM hunting is assigned, all of the VM ports of an
extension group are searched until an idle one is found which allows Voice Mail Service. If AA
hunting is assigned, all of the AA ports of an extension group are searched until an idle one is
found which allows AA Service. If Ring Group is assigned, all of the extensions in the ring
group ring simultaneously.
Selection
• Extension group number: 1 through 8,
( = all extension groups)
• Disable (no hunting) / Terminate (terminating) / Circular / VM (voice mail) / AA
(automated attendant) / RING
Default
All extension groups — Disable
Programming
1.
Enter 106.
Display: 106 STATION HUNT
2.
Press NEXT.
Display: EXT GRP NO?
3.
Enter an extension group number.
To enter extension group number 1, you can also press NEXT.
Display example: Group1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another extension group, press NEXT or PREV, or SELECT and the desired
extension group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Programming Guide
General Programming
49