Please see the following example which shows how to select a desired character.
For example, to select the letter "M":
a)
Press 6. ("M" belongs to "6".)
b)
Press the SELECT button once.
• Pressing the SELECT button an appropriate number of times gives you the desired
letter. Pressing SELECT twice gives the letter "m", pressing three times gives "N",
and so on.
Example of entering characters: to enter "Mike":
1. Enter 6.
2. Press SELECT.
3. Enter 4.
4. Press SELECT six times.
5. Enter 5.
6. Press SELECT four times.
7. Enter 3.
8. Press SELECT four times.
Note
• To erase all the letters, press CLEAR.
• To erase the last letter, press
Programming Guide
The display shows:
6
M
M4
Mi
Mi5
Mik
Mik3
Mike
.
General Programming Instructions
15