Automatic Access Outside Line Assignment - Panasonic KX-TA1232 Programming Manual

General Programming

[103] Automatic Access Outside Line Assignment

Description
Assigns the sequence in which outside line groups will be accessed when in Automatic Line
Access mode. When a user dials the feature number for automatic line access (default=9) or
presses the Loop-CO button, an idle line is searched for in the programmed outside line group
order.
Selection
• Outside line group number: 1 through 8 in desired order
Default
12345678
Programming
1.
Enter 103.
Display: 103 AUTO CO GRP
2.
Press NEXT.
Display example: Access:12345678
3.
Enter the outside line group numbers in priority from top to bottom.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new order.
4.
Press STORE.
5.
Press END.
Conditions
• The system supports a maximum of eight outside line groups.
Features Guide References
Line Access, Automatic
Line Access, Direct
Line Preference — Outgoing (Idle Line / No Line / Prime Line)
46 Programming Guide