Outgoing Permitted Outside Line Assignment -- Day / Night - Panasonic KX-TA1232 Programming Manual

General Programming
[605-606] Outgoing Permitted Outside Line Assignment —— Day /
Night
Description
Determines the outside lines which can be accessed by an extension in both day and night
modes. The extension users can make outgoing outside calls using the assigned outside lines.
Selection
• Jack number: 01 through 32,
• Outside line (CO) number: 01 through 12,
• Enable (enable) / Disable (disable)
Default
All jacks — all outside lines — Enable —— Day / Night
Programming
1.
Enter a program address (605 for day or 606 for night).
Display example: 605 CO DAY OUT
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:CO01:Enable
4.
Enter the desired outside line number, or keep pressing
line is displayed.
To change the current entry, enter the new number.
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
To program another jack, press NEXT or PREV, or SELECT and the desired jack
number.
8.
Repeat steps 4 through 7.
9.
Press END.
Conditions
• To assign all jacks or all outside lines to one selection, press the
these cases, the display shows the contents programmed for Jack 01 or outside line 01.
• To assign no outside line for an extension, press CLEAR in step 4.
158
( =all jacks)
( =all outside lines)
or until the desired outside
key in step 3 or 4. In
Programming Guide