Panasonic KX-TA1232 Programming Manual page 196

General Programming
Area Bit
05 8 Selects how long the system keeps the
door opener unlocked.
9 Enables or disables dial tone 2 when an
extension sets programmable extension
features such as Call Waiting.
10 Determines the result when pressing the
FLASH button during an outside call
(When Area 01-bit 3=0).
Flash: Disconnects and accesses the
same outside line.
Terminate: Terminates the outside line
11 Selects the message waiting ring type: 3
quick rings or 2 normal rings, for single
line telephones.
12 Selects the SMDR format for an
incoming call with Caller ID. The
caller's number only or caller's number
only or caller's number and name is
selected.
13 Enables or disables the SMDR printout
for RC (when an incoming call occurs)
and AN (when an incoming call is
answered).
14 Selects the result when a call from DISA
(Direct Inward System Access) is
invalid.
15 Selects the result of pressing "0"
(default); calls operators 1 and 2 at the
same time or Operator 1 first and then
Operator 2 if Operator 1 is busy.
16 Enables or disables the SMDR printout
when the Timed Reminder starts and the
alarm is not answered.
196
Explanation
Description
and accesses the intercom.
Selection Default
0 : 3 s 1
1 : 5 s
0 : disable 1
1 : enable
0: Terminate 1
1: Flash
0 : 3 times by 1
40 ms
1 : 2 times by
280 ms
0 : <Incoming> + 1
caller no.
1 :<I> + caller no.
+ name
0 : enable 1
1 : disable
0 : IRNA 1
1 : reorder tone is
sent
0 : Operators 1 and 1
2
simultaneously
1 : Operator 1 first
and then
Operator 2
0 : enable 1
1 : disable
Programming Guide
References
Door Opener
None
Flash
Message Waiting
Station Message
Detail Recording
(SMDR)
None
None
Operator Call
Timed Reminder