Panasonic KX-TA1232 Programming Manual page 18

General Programming Instructions
Sample of Description
6. To program another speed dial
number, press NEXT or
PREV, or SELECT and the
desired speed dial number .
7. Repeat steps 4 through 6.
(17)
8. Press END.
(18)
Conditions • Each speed dial number has a
maximum of 24 digits. The valid
characters are 0 through 9, the
# keys, and the FLASH, PAUSE,
SECRET and – (hyphen) buttons.
(19)
Features Guide References
System Speed Dialing
Program Address Programming Group
[0XX] Manager Programming
[1XX] System Programming
[2XX] Timer Programming
[3XX] TRS Programming
[4XX] Outside Line Programming
[5XX] COS Programming
[6XX] Extension Programming
[8XX] Resource Programming
[9XX] Option Programming
18
(15) Select the best way for you to store another speed
dial number. Pressing the NEXT / PREV allows
you to select the next higher / lower speed dial
(15)
number. You can also keep pressing them until the
desired one is displayed. If you press SELECT
(16)
and the desired speed dial number, the selected
code is displayed.
(16) You can continue to program another entry.
(17) After you have stored all your entries, finish this
and
program by pressing END. After pressing END
you can go to any program address you desire.
You can return to the Initial Message mode any
time by pressing END.
(18) Tells you what you should notice or consider when
doing the programming.
(19) Lists all of the features related to the
programming. These features are described in
Section 3.
Programming Structure
These programs may be accessed by the system
manager of the customer to meet frequent changes
requested by the customer.
Entire system programming.
Flexible system timer setting.
Assignment of Toll Restriction.
Setting of outside line and outside line group values.
Setting of Class of Service (COS).
Setting of extension values.
Assignment of customer-supplied peripherals
connected to the system.
Used to answer the user's requirements or troubles,
if needed.
Explanation
Description
Programming Guide