Panasonic KX-TA1232 Programming Manual page 28

General Programming
* Available when the KX-TA1232 is connected to a Proprietary Telephone capable Panasonic Voice
Processing System (one that supports DPT Integration; e.g., KX-TVS50).
Default
All jacks — CO buttons 1 through 12 = Single-CO 01 through 12
Programming
1.
Enter 005.
Display: 005 FLEXIBLE CO
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display: PT—PGM Mode
4.
Press the CO button which is changed to another button.
The display shows the contents pre-assigned to the button.
Display example: CO-01
5.
Enter a button code (plus parameter, if required).
To change the parameter, press CLEAR and enter the new parameter.
6.
Press STORE.
7.
To program another CO button of the same jack, repeat steps 4 through 6.
To program another jack, press SELECT and repeat steps 3 through 6.
8.
Press END.
Canceling
1.
Perform the same procedures as steps 1 through 4 above.
2.
Enter 2.
3.
Press STORE.
4.
Press END.
Conditions
• A centralized telephone is a telephone connected to jack 01 or a jack programmed as a
manager extension in program [006] Operator / Manager Extension Assignment.
Features Guide References
Button, Flexible
Buttons on Proprietary Telephones
28 Programming Guide