Panasonic KX-TA1232 Programming Manual page 195

Area Bit
05 1 Enables or disables the automatic time
adjustment by Caller ID information
once a day by the first call received after
3:00AM.
2 An outside-to-outside DISA call can be
prolonged many times. This bit specifies
how many times is possible.
3
Enables or disables retry by dialing " "
during DISA outside call.
4 Unused
5 Sets the time the system waits for IRNA
after the OGM.
6 Selects the result when an outside call is
routed by Call Forwarding to a voice
mail port which is in Automated
Attendant (AA) service mode. [For both
Inband and DPT Integration]
disable: AA service mode
enable: The mode will change to the
Voice Mail (VM) service mode
and a Follow-On ID [Only
when Inband Integration] is sent.
When the voice mail port is in VM
service mode, this program is not
affected.
7 Selects the result when an outside call is
routed to a voice mail port by IRNA.
[For both Inband and DPT Integration]
When the voice mail port is in VM
service mode:
enable: VM service mode
disable: The mode will change to the
AA service mode. [Only when
Inband Integration]
When the voice mail port is in AA
service mode:
enable: The mode will change to the
VM service mode and a Follow-
On ID [Only when Inband
Integration] is sent.
disable: AA service mode
Programming Guide
Explanation
Description Selection Default
0 : enable 1
1 : disable
0 : 10 times 1
1 : no limitation
0 : disable 1
1 : enable
0 : immediately 1
1 : after 5 seconds
0 : disable 1
1 : enable
0 : enable 1
1 : disable
General Programming
References
Caller ID
Direct Inward
System Access
(DISA)
DISA
Outgoing Message
(OGM)
Voice Mail
Integration
Voice Mail
Integration
195