Panasonic KX-TA1232 Programming Manual page 114

General Programming
Conditions
• To assign all lines to one selection, press the
the contents programmed for outside line 01.
• If DTMF is assigned, set the DTMF time of the line in program [404] DTMF Time.
• If pulse or call blocking is assigned, set the pulse speed of the line in program [403] Pulse
Speed Selection, and set the pulse break ratio and inter-digit pause in program
[990] System Additional Information, Area 02 - Bit 7 and in Area 02 - Bit 12, 11, if
necessary.
Features Guide References
Dial Type Selection
114
key in step 3. In this case, the display shows
Programming Guide