Panasonic KX-TA1232 Programming Manual page 38

General Programming
5.
Press to program COS.
6.
Enter a COS number.
To change the current entry, enter the new COS number.
7.
Press STORE.
8.
To program another user code, press NEXT or PREV, or SELECT and the desired DISA
user code number.
9.
Repeat steps 4 through 8.
10.
Press END.
Conditions
• This setting is required if Trunk (Outside line) Security mode is selected in program
[809] DISA Security Type.
• There are 32 programmable user codes. Each code should be unique and composed of four
through ten numerical digits, 0 through 9.
Features Guide References
Direct Inward System Access (DISA)
38 Programming Guide