Firmware Upgrade; Network Utility - TRENDnet TEW-740APBO User Manual

TRENDnet User's Guide

Firmware Upgrade

Firmware is the main software image that system needs to respond to requests and to
manage real time operations. Firmware upgrades are sometimes required to include
new features or bugs fix. It takes around 2 minutes to upgrade due to complexity of
firmware. To upgrade system firmware, click Browse button to locate the new firmware,
and then click Upgrade button to upgrade.

Firmware Version: Access point's current firmware version

Firmware Date: Firmware date of access point

Select File: Click Browse button to locate a configuration file to restore, and then
click Upgrade button to upload.

TFTP Server IP: Enter the IP address of the TFTP server to use for firmware upgrade

File: Enter the location of the firmware file to use, and then click Upgrade button
to upload.

URL: Enter the URL to use to upgrade access point's firmware. Then, click Reboot
button to activate.

Network Utility

The administrator can diagnose network connectivity via the PING and TRACEROUTE
utility.
Please click on Utilities -> Network Utility and follow the below setting
© Copyright 2016 TRENDnet. All Rights Reserved.

Ping: This utility will help ping other devices on the network to verify connectivity.
Ping utility, using ICMP packets, detects connectivity and latency between two
network nodes. As result of that, packet loss and latency time are available in the
Result field while running the PING test.
o Destination IP/Domain: Enter desired domain name, i.e. www.google.com, or IP
address of the destination, and click ping button to proceed. The ping result will
be shown in the Result field.
o Count: By default, it's 5 and the range is from 1 to 50. It indicates number of
connectivity test.

Traceroute: Allows tracing the hops from the access point to select an outgoing IP
address. It should be used for the finding the route taken by ICMP packets across
the network to the destination host. The test is started using the Start button, click
Stop button to stopped test
o Destination Host: Specifies the Destination Host for the finding the route taken
by ICMP packets across the network.
o MAX Hop: Specifies the maximum number of hops( max time-to-live value)
traceroute will probe.
TEW-740APBO
84