Repeater Ap Setup - TRENDnet TEW-740APBO User Manual

Hide thumbs Also See for TEW-740APBO:
Table of Contents

Advertisement

TRENDnet User's Guide
 Signal: Received signal strength of all found Access Points.
 Channel: Channel numbers used by all found Access Points.
 Security: Security type by all found Access Points.
 Band: Wireless band used by all found Access Points.
 Network Type: Network type used by all found Access Points.
 Select: Click "Select" to configure settings and associate with chosen AP.

Repeater AP Setup

The administrator can configure station profiles via this page.
Please click on Wireless -> Wireless Profile and follow the below setting.
 ESSID: Assign Service Set ID for the wireless system.
 Enable Repeater SSID: Select Enable to broadcast the repeated signal.
 Hidden SSID: Select Enable to broadcast the access point's SSID.
 Client Isolation: Select Enable to isolate wireless clients from each other.
 IAPP:
 Maximum Clients: Enter the amount of wireless clients allowed to connect to the
access point.
Security Type: Select the desired security type from the drop-down list; the options
are Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and
WEP 802.1X.
o
Disable: Data are unencrypted during transmission when this option is selected.
© Copyright 2016 TRENDnet. All Rights Reserved.
WEP Auth Method: Enable the desire option among OPEN or SHARED
o
Key Index: Key index is used to designate the WEP key during data transmission.
4 different WEP keys can be entered at the same time, but only one is chosen.
o
WEP Key #: Enter HEX or ASCII format WEP key value; the system supports up to
4 sets of WEP keys.
WPA-PSK (or WPA2-PSK): WPA (or WPA2) Algorithms, allows the system accessing
the network by using the WPA-PSK protected access.
o
Cipher Suite: By default, it is AES. Select either AES or TKIP cipher suites
o
Group Key Update Period: By default, it is 600 seconds. This time interval for
rekeying GTK, broadcast/multicast encryption keys, in seconds. Entering the time-
length is required.
o
Master Key Update Period: By default, it is 83499 seconds. This time interval for
rekeying GTK, broadcast/multicast encryption keys, in seconds. Entering the time-
length is required.
TEW-740APBO
52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents