Configuring DS0 Channels
The DSU/CSU provides channel configuration options
that allow you to do the following:
Display the DS0 assignments for the network and
data port interfaces.
Allocate DS0 channels on the network interface to
the data port.
Clear (deallocate) all DS0 channels from the
network or data port interface.
To allocate DS0 channels, begin by defining the logical
channel configuration for the network interface, and then
Port 1, if desired.
Port Chan
Conf
Assign To
Assign By
If Assign By Block
Port 1
If Assign By
ACAMI
ACAMI
If Assign By Chan
3163-A2-GB20-10
Options
Port Rate
Start At
Port Rate
Start At
Figure 3-6. Port Channel Configuration Worksheet
March 1999
Blank configuration worksheets are provided at the
back of Appendix C,
Configuration
the configuration worksheets for DS0 channel allocation:
1. Using the worksheet shown in Figure 3-6, circle
the configuration options needed to implement the
logical channel configuration.
2. Once you have completed the worksheet, enter
this information using the procedures in the
Allocating Data Ports
Value
NET
Block, ACAMI, Chan
Nx64: 64, 128, 192, 256, 320, 384, 448, 512, 576,
640, 704, 768, 832, 896, 960, 1024, 1088, 1152,
1216, 1280, 1344, 1408, 1472, 1536
Nx56: 56, 112, 168, 224, 280, 336, 392, 448, 504,
560, 616, 672, 728, 784, 840, 896, 952, 1008, 1064,
1120, 1176, 1232, 1288, 1344
Time Slot (N x ): 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24
(Select One)
Nx64: 64, 128, 192, 256, 320, 384, 448, 512, 576,
640, 704, 768
Nx56: 56, 112, 168, 224, 280, 336, 392, 448, 504,
560, 616, 672
Time Slot (N x ): 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23
(Select One)
Time Slot (N x ): 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24
(Select Multiple)
Operation
Options. To complete
section on page 3-17.
3-15