Operation Modes; Continuous Operation; Edge Pre-Select Trigger Mode - IAI cm-140ge User Manual

CM-140GE / -RA/-UV / CB-140GE / -RA
Vertical Binning
FRAME RATE 527L 48.86fps
LVAL
FVAL
DAVL
3L 3L
DATA OB
CCD
Exposure
EEN
XEEN

8.5. Operation Modes

This camera can operate in 5 primary modes.
1. Continuous mode

2. Edge Pre-Select trigger mode

3. Pulse Width Control trigger mode
4. Reset continuous trigger mode
5. Sequential trigger
6. Delayed Readout trigger
7. Delayed Readout trigger

8.5.1 Continuous operation

For applications not requiring asynchronous external trigger, but where a continuous stream of
images is required, this mode should be used.
In this mode it is possible to use a lens with video controlled iris.
For timing details, refer to fig. 20. through fig. 25.
To use this mode:
Set function:
1+2 3+4
Fig.25. Vertical Timing for Vertical Binning
Trigger mode
Scanning
Vertical binning
Shutter mode
Shutter speed
Programmable exposure
1037+1038 1039+1040
520L
Valid data
Pre-selected exposure.
Pre-selected exposure.
Pulse width controlled exposure.
Pre-selected exposure
Pre-selected exposure
Pre-selected exposure
Pulse width controlled exposure
Continuous
Full, Partial scanning
On/Off (CM-140GE/CM-14-0GE-RA only)
Preset, Programmable, Abs
- 38 -
1L
OB
OB