Confirm The Filter Driver Is Used - IAI cm-140ge User Manual

CM-140GE / -RA/-UV / CB-140GE / -RA

8.2.8 Confirm the Filter Driver is used

 The filter driver is installed as an optional function when JAI SDK is installed. If the filter
driver is not installed at that time, it can be installed , All Programs ⇒
GigE Vision Filter Driver ⇒
 If the Filter Driver is installed properly, the Camera Control Tool indicates "Driver Type
Filter Driver" in the Network Interface.
1. At first, type in the frame rate of the
connected camera.
CM-140GE/-RA and CB-140GE/-RA
operates at 31 fps (16fps for UV).
2. Set the bandwidth at 80%.
3. Click the calculation tab.
4. New value is calculated.
5. Click OK. This shown value is automatically
transferred to the Packet Delay column of

the Control Tool.

Ver.1.2.1 Control tool shows real delay time.


Install GigE Vision Filter Driver.
- 28 -
JAI SDK
⇒