NetComm 3G42W-M User Manual page 14

5. Basic - Home
The web user interface (WUI) is divided into two window panels, the main menu (on the top) and the display screen (on the bottom). The main
menu has the following options: Basic, 3G Settings, Wi-Fi, Management, Advanced and Status.
Selecting one of these options will open a submenu with more options. Basic is discussed below while subsequent chapters introduce the other
main menu selections.
NOTE: The menu options available within the web user interface are based upon the device configuration and user privileges (i.e. local or remote).
The following table provides further details
Field
Model Name
Board ID
Bootloader (CFE) Version
Wireless Driver Version
MAC Address
Serial Number
Device Info For 3G
Network
Link
Mode
Signal Strength
SIM Info
Connection Status
LAN IP Address
WAN IP Address
Primary DNS Server
Secondary DNS Server
Date/Time
HSPA+ 42Mbps WiFi Router User Guide
14
Description
Model number of your device
The unique number of the board inside your device
The version of the bootloader
The current version of wireless driver being used by your device
The MAC address of the network interface
The serial number of the unit
The name of your 3G network
The status of your 3G connection
The radio access technique currently used to enable internet access. It can be HSUPA, HSDPA, UMTS,
EDGE, GPRS or Disconnected.
The mobile network (UMTS) signal quality available at the device location. This signal quality affects
the performance of the unit. If two or more bars are green, the connection is usually acceptable.
Shows the SIM card status on the device.
Shows the IP address for LAN interface.
Shows the IP address for WAN interface.
Shows the IP address of the primary DNS server.
Shows the IP address of the secondary DNS server.
The time according to the device's internal clock
YML42
www.netcomm.com.au