Table of Contents
Advertisement
9.3 Security
9.3.1 IP Filtering
The IP Filtering screen sets filter rules that limit incoming and outgoing IP traffic. Multiple filter rules can be set with at least one limiting
condition. All conditions must be fulfilled before individual IP packets can pass the filter.
Outgoing IP Filter
The default setting for Outgoing traffic is ACCEPTED. Under this condition, all outgoing IP packets that match the filter rules will be BLOCKED.
To add a filtering rule, click the Add button. The following screen will display.
Filter Name
Protocol
Source IP address
Destination IP address
Source Port (port or port:port)
Destination IP address
Destination Subnet Mask
Destination port (port or port:port)
Click Apply/Save to save and activate the filter.
YML42
www.netcomm.com.au
NETCOMM LIBERTY™ SERIES - HSPA+ 42Mbps WiFi Router
The filter rule label
TCP, TCP/UDP, UDP or ICMP Source IP address
Enter source IP address Source Subnet Mask
Enter source subnet mask
Enter source port number or port range
Enter destination IP address
Destination Subnet Mask
Enter destination port number or range
HSPA+ 42Mbps WiFi Router User Guide
35
Advertisement
Table of Contents
