Quick Start; Quick Setup; Connection Type - NetComm RTA1320 User Manual

ADSL Router User Manual

Quick Start

Quick Setup

The quick setup wizard will guide you to
configure the DSL router through some
steps.
VPI (Virtual Path Identifier): 8.
VCI (Virtual Channel Identifier): 48.
After finished entering the VPI/VCI value,
please click Next for next step

Connection Type

After clicking on the Next button from the
VPI/VCI web page, the following screen will
appear. Please choose the connection type
and encapsulation mode that you want to use
and click Next for next page.
For example, PPP over Ethernet (PPPoE) in
this screen is selected.
.
In this screen, you have to choose the
settings for WAN IP. To get the IP address
automatically, click the Obtain an IP
address automatically radio button.
Click Enable NAT.
Type in the number into the field of MTU.
The default setting is 1492.
Click Next for next screen.
24