For Mac Osx - NetComm 3G42W-M User Manual

Hide thumbs Also See for 3G42W-M:

Table of Contents

11.2 For MAC OSX

These steps explain the procedure for enabling the Printer Server.

1. Click on the Apple menu, select System Preferences.

2. In the System Preference menu click on the Print & Fax.

3. Click the + button to add your printer.

4. Mouseover to the Protocol drop down list and select Internet Printing Protocol – IPP

5. In the Address field, type "192.168.1.1:631"

6. In the Queue field, type "/printers/{PrinterName}"

NOTE: {PrinterName} must be the same as the printer name entered into the Printer section of the Connect Router's user interface.

7. From the Print Using drop down list, select your corresponding printer driver.

8. Click Add and check the printer status.

HSPA+ 42Mbps WiFi Router User Guide

YML42

www.netcomm.com.au

Table of Contents