3. Click on the radio-button labelled 'Select a shared printer by name', and type
"http://192.168.1.1:631/printers/42printer" in the box below. Click 'Next'.
NOTE: The PrinterName must be the same as the printer name entered into the Printer section of Connect Router's user interface.
4. Next, select the driver that came with your printer. Browse through the list to select your printer driver, or click 'Have Disk' if you
have your printer driver installation media.
5. Choose whether you want this printer to be the default printer, and then click 'Next'.
6. Click 'Finish'. Your device is now configured and ready for use.
YML42
www.netcomm.com.au
NETCOMM LIBERTY™ SERIES - HSPA+ 42Mbps WiFi Router
HSPA+ 42Mbps WiFi Router User Guide
49