Table of Contents
Advertisement
6.3.1 PIN Code Protection
PIN code protection prevents the use of a SIM card by unauthorized persons. To use the 3G internet service with this router however, the PIN
code protection should be disabled. If the SIM card inserted into the router is locked with a PIN code, the web user interface will display the
following screen after first login.
Please input the PIN code, select Remember PIN code as Yes and click Apply.
PIN Lock Off
If you wish to always connect to the Internet using a PIN locked SIM card, you should first turn PIN code protection off. Please click on PIN
Configuration from the menu.
Select Change PIN Code Protection. Un-tick Enable PIN Lock and enter the PIN code twice. Please keep in mind you only have 3 attempts
before your SIM card is locked. The Times remaining shows how many attempts are left. Contact Mobily if you require assistance. Afterwards,
click Apply. The following dialog box should now appear.
PIN Lock On
After you are finished using your SIM card for Internet access, you may wish to lock the SIM card again. In this case, first go to the PIN
configuration screen, as shown below.
Select Change PIN Code Protection. Tick Enable PIN Lock, enter the PIN code twice. You can set Remember PIN code to yes so you don't need
to input the PIN code every time when the gateway turns on with this SIM inserted. Then click Apply. After you do so, the following dialog box
should appear.
You can now return your SIM card to your cellular phone or other mobile device.
YML42
www.netcomm.com.au
NETCOMM LIBERTY™ SERIES - HSPA+ 42Mbps WiFi Router
HSPA+ 42Mbps WiFi Router User Guide
17
Advertisement
Table of Contents
