Basic>Adsl Quick Setup - NetComm NB9 User Manual

Basic>ADSL Quick Setup
The NB9/NB9W web confi guration page can be opened in a Web Browser window of a computer attached to
the device by entering the Web address http://192.168.1.1. Enter User ID: admin and password: admin.
The 'ADSL Quick Setup' page will then be displayed when the device is fi rst started, or if you have deleted
your WAN connection settings or reset the NB9/NB9W to factory defaults. The 'ADSL Quick Setup' screen
appears as follows:
Field
User Id
Password
Save & Reboot
Type in the User ID and Password and click on Save/Reboot, close the browser and wait several minutes. Then
re-open browser window and log into NB9/NB9W again following steps above. You will then see the Basic>Home
page indicating your ADSL service is connected. Proceed to confi gure VoIP and Wireless, if required.
NOTES:
* PPPoE (Point to Point Protocol over Ethernet) is the standard connection method for Australian ISPs.
** ADSL is 'UP': this means the ADSL Synch Light must be steady green
NB9/NB9W ADSL2+ VoIP Router
YML790 Rev1
Description
The PPPoE username issued by your ISP (e.g. user@isp.com.au)
The PPPoE password issued by your ISP
This button saves your settings, reboots the NB9/NB9W and connects to the Internet.
Once completed you will be returned to the 'Basic > Home' page
23