Other (Parallel Converter Cable) - Omron fh series Hardware Manual

6-1-7

Other (Parallel Converter Cable)

When you change to connect the F series, FZ5 series, or FZ5-L series to FH series Sensor Controller,
you can convert by using the appropriate parallel converter cable of FH-VPX series under the usable
condition.
Applicable Model
FZ series
FZ -L35x series F160-C10
F160 series
F210 series
F500 series
F250 series
F270 series
*1. Even if RESET signal cannot be use by conversion, conversion is possible to convert satisfying other usable
condition.
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
Applica-
ble sig-
nal
F160-C10 Yes
Yes
F160-C10 Yes
F160-C10CP No
F160-C10CF No
F210-C10 Yes
F210-C10-ETN Yes
F500-C10 Yes
No
No
Applicable paral-
lel convert cable
FH-VPX-FZ
• Do not use RESET signal.
• Use with COMIN and COMUT are
same power source.
FH-VPX-FZL
• Do not use RESET signal.
FH-VPX-F160
• Do not use RESET signal.
• Use with COMIN and COMOUT
are same power source.
• Do not use DI5 and DI6.
---
---
FH-VPX-F210
• Do not use RESET signal.
FH-VPX-F210
• Use with COMIN and COMOUT
FH-VPX-F210
are same power source.
• Do not use DI8 and DI9.
---
---
6 I/O Interface
Usable Condition
*1
*1
*1
---
---
*1
---
---
6 - 33
6