Omron fh series Hardware Manual page 62

3 Configuration
Sensor Controller Series
Type
Sensor Controller Model
When con- Connected to
nected to a 2 cameras
Controller
Connected to
4 cameras
Connected to
Current
8 cameras
consump-
When not Connected to
tion
connected 2 cameras
to Control-
Connected to
ler
4 cameras
Connected to
8 cameras
Built-in FAN
Ambient temperature
range
Ambient humidity range
Ambient atmosphere
Vibration tolerance
Usage
Environ-
ment
Shock resistance
Noise Fast Tran-
immunity sient Burst
Grounding
Dimensions
Weight
External
Features
Degree of protection
Case material
*1. When the 12 megapixels camera: Max. 4 cameras are connectable.
When use except 12 megapixels cameras: Max. 8 cameras are connectable.
*2. Existing third class grounding
3 - 4
FH-3000 series
High-speed Controller (4 cores)
FH-3050 FH-3050-10 FH-3050-20
5.0 A max. 5.4 A max. 6.4 A max. 4.7 A max.
7.0 A max. 8.1 A max.
---
--- ---
4.1 A max. 4.2 A max. 5.2 A max. 3.6 A max.
4.8 A max. 5.6 A max.
---
--- ---
Yes
Operating: 0°C to 50°C
Storage: -20 to +65°C (with no icing or condensation)
Operating:35 to 85%RH
Storage: 35 to 85%RH (with no condensation)
No corrosive gases
Test sort B
Oscillation frequency: 10 to 150 Hz
Half amplitude: 0.1 mm
2
Acceleration: 15 m/s
Sweep time: 8 minute/count
Sweep count: 10
Vibration direction: up and down/front
and behind/left and right
Test sort1
2
Impact force: 150 m/s
Test direction: up and down/front and
behind/left and right
• DC power
Direct infusion: 2kV, Pulse rising: 5ns, Pulse width: 50ns,
Burst continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min
• I/O line
Direct infusion: 1kV, Pulse rising: 5ns, Pulse width: 50ns,
Burst continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min
Type D grounding (100 or less grounding resistance)
190 mm × 115 mm × 182.5 mm
Note Height: Including the rubber feet at the base.
Approx. Approx.
3.2 kg 3.4 kg
IEC60529 IP20
Cover: zinc-plated steel plate
Side plate: aluminum (A6063)
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
FH-1000 series
Standard Controller (2 cores)
FH-1050
---
11.5 A
---
max.
---
6.8 A max.
---
Oscillation frequency: 10 to 150 Hz
Half amplitude: 0.1 mm
Acceleration: 15 m/s
Sweep time: 8 minute/count
Sweep count: 10
Vibration direction: up and down/front
and behind/left and right
Impact force: 150 m/s
Test direction: up and down/front and
behind/left and right
*2
Approx. Approx.
3.4 kg 3.2 kg
FH-1050-10 FH-1050-20
5.0 A max. 5.9 A max.
6.5 A max. 7.5 A max.
10.9 A
---
max.
3.7 A max. 4.5 A max.
4.3 A max. 5.0 A max.
6.2 A max.
---
2
2
Approx. Approx.
3.4 kg 3.4 kg