Omron fh series Hardware Manual page 156

5 Setup and Wiring
Mounting the DIN rail
1
Mount DIN rail mounting bracket: FH-XDM-L, to the four mount holes on the back of the Sensor
Controller.
2
Mount the DIN rail.
59
• Recommended tightening torque: 0.54 N
• The tolerance:
5 - 16
Screw for Fixing
Four, M4 x 10
FH-XDM-L
10.5
Four, M4 depth 6.5
±
0.2 mm
• •
m to 0.6 N m
Vision System FH/FZ5 series Hardware Setup Manual (Z366)