Extension Tubes - Omron fh series Hardware Manual

3-4-8

Extension Tubes

Specification
Lenses
For M42 mount Lenses
Model 3Z4S-LE VS-EXR/M42
Contents Set of 5 tubes (20 mm, 10 mm, 8
mm, 2 mm, and 1 mm)
Maximum outer diameter: 47.5
mm dia.
*1. Do not use the 0.5-mm, 1.0-mm, and 2.0-mm Extension Tubes attached to each other. Since these Extension Tubes are
placed over the threaded section of the Lens or other Extension Tube, the connection may loosen when more than one
0.5-mm, 1.0-mm or 2.0-mm Extension Tube are used together.
Reinforcement is required to protect against vibration when Extension Tubes exceeding 30 mm are used.
When using the Extension Tube, check it on the actual device before using it.
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
*1
For C mount Lenses
3Z4S-LE SV-EXR
Set of 7 tubes (40 mm, 20 mm,10
mm, 5 mm, 2.0 mm, 1.0 mm, and
0.5 mm)
Maximum outer diameter: 30 mm
dia.
3 Configuration
*1
For Small Digital CCD Cameras
FZ-LESR
Set of 3 tubes (15 mm,10 mm, 5
mm)
Maximum outer diameter: 12 mm
dia.
3
3 - 55