Configuring Network Parameters Assignment - HP 5920 Series Configuration Manual

Step
4. Specify an IPv6 subnet for
dynamic assignment.
5. (Optional.) Specify a
non-temporary IPv6 address
range.
6. (Optional.) Specify a
temporary IPv6 address
range.
7. (Optional.) Create a static
binding.

Configuring network parameters assignment

In addition to IPv6 prefixes and IPv6 addresses, you can configure up to eight DNS server addresses,
one domain name suffix, eight SIP server addresses, and eight SIP server domain names in an address
pool.
To configure network parameters assignment:
Step
1. Enter system view.
2. Create a DHCPv6 address
pool and enter its view.
3. Specify an IPv6 subnet for
dynamic assignment.
4. (Optional.) Specify a DNS
server address.
5. (Optional.) Specify a domain
name suffix.
6. (Optional.) Specify a SIP
server address or domain
name.
7. (Optional.) Configure a
self-defined DHCPv6 option.
Command
network prefix/prefix-length
[ preferred-lifetime
preferred-lifetime valid-lifetime
valid-lifetime ]
address range start-ipv6-address
end-ipv6-address
[ preferred-lifetime
preferred-lifetime valid-lifetime
valid-lifetime ]
temporary address range
start-ipv6-address end-ipv6-address
[ preferred-lifetime
preferred-lifetime valid-lifetime
valid-lifetime ]
static-bind address
ipv6-address/addr-prefix-length |
duid duid [ iaid iaid ]
[ preferred-lifetime
preferred-lifetime valid-lifetime
valid-lifetime ]
Command
system-view
ipv6 dhcp pool pool-name
network prefix/prefix-length
[ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
dns-server ipv6-address
domain-name domain-name
sip-server { address ipv6-address |
domain-name domain-name }
option code hex hex-string
145
Remarks
By default, no IPv6 address
subnet is specified.
You cannot use this command to
configure the same subnet in
different address pools.
By default, no non-temporary IPv6
address range is specified, and
all unicast addresses on the
subnet are assignable.
By default, no temporary IPv6
address range is specified, and
the DHCPv6 server cannot assign
temporary IPv6 addresses.
By default, no static binding is
configured.
To add more static bindings,
repeat this step.
Remarks
N/A
By default, no DHCPv6
address pool exists on the
DHCPv6 server.
By default, no IPv6 subnet is
specified.
By default, no DNS server
address is specified.
By default, no domain name
suffix is specified.
By default, no SIP server
address or domain name is
specified.
By default, no self-defined
DHCPv6 option is configured.