Redmote Lcd Display Menu - RED EPIC-M DRAGON (Carbon Fiber) Operation Motion

EPIC/SCARLET OPERATION GUIDE
CUSTOMIZE REDMOTE SETTING MENUS
When operating the REDMOTE in Local mode, you can configure the settings displayed in each status window.
Settings can be assigned to one (1) of the five (5) pages available under Soft Menu Buttons (4-8).
To customize settings, follow the instructions below:
1. Ensure the camera is on and wirelessly connected to the REDMOTE.
2. If the REDMOTE is in Remote Mode, press Button 2 to toggle to Local Mode.
3. Select the Soft Menu Button (4-8) page you would like to set the desired setting on.
4. Use the Directional Keys to move the red cursor to the desired setting location.
5. Press Button 3.
6. Select Setup Slot and press ENTER.
7. Select the desired setting from the available list.
8. Press Enter.

REDMOTE LCD DISPLAY MENU

The REDMOTE LCD displays key camera settings of a paired and connected camera. There are five (5) available
REDMOTE Setting menus, accessible with the Soft Menu Buttons (4-8).
NOTE: Soft Menu Buttons 7 and 8 are not defined.
The primary REDMOTE Setting Menu (Button 4) displays the following menu elements:
REDMOTE item Description
HDR Displays HDRX mode status
1:1 Tallies when magnify is selected
False Color Displays false color overlay mode
LAN Indicates communication via Ethernet connection
RIG Indicates 3D rig metadata is present
SYNC Indicates sensor shutter sync status
GEN Indicates presence of valid Genlock signal/HD-SDI sync to genlock
TC Indicates presence of valid SMPTE timecode signal
Aperture Displays aperture when using supported Canon, Nikon, or Cooke lenses
Focus Dist. Displays optimum focus distance when using supported Canon, Nikon, or Cooke lenses
Sensitivity Camera sensor sensitivity
Exposure Integration time or shutter angle
Color Temp White balance
Format Recording resolution
REDCODE REDCODE compression setting
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC 9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F | 1 6 5