Redmote Basics - RED EPIC-M DRAGON (Carbon Fiber) Operation Motion

Digital still and motion camera (dsmc) system
Hide thumbs Also See for EPIC-M RED DRAGON (Carbon Fiber):
Table of Contents

Advertisement

EPIC/SCARLET OPERATION GUIDE
NAVIGATION GROUP
Use the Navigation Group to navigate the camera menus and change settings.
Scroll Wheel: Select and adjust the value of a selected setting.
Directional Keys (D-Pad): Navigate menus.
ENTER: Press ENTER to confirm a setting or access the selected menu.
POWER/KEY LOCK SWITCH
Turn on: Press and hold the switch in the down position for two (2) seconds.
Turn off: Press and hold the switch in the down position for five (5) seconds. Or, press the switch down into the
down position and release to access the Shutdown menu.
Lock keys: Move the switch to the up position to prevent unintentional operation. "KEYS LOCKED" display above
the Primary Soft Menu Buttons when lock is enabled.

REDMOTE BASICS

This section describes the common REDMOTE operations.
DOCK THE REDMOTE
 1. Position the REDMOTE V-Mount dock over the V-Mount on the BRAIN or rear module.
 2. Slide the REDMOTE down until you hear a click, which indicates the REDMOTE is securely attached.
NOTE: Docking the REDMOTE automatically pairs the REDMOTE with the camera when the camera is turned on
and wireless settings are enabled.
UNDOCK THE REDMOTE
 1. Press both Release buttons, located on the sides of the REDMOTE.
 2. Slide the REDMOTE up to release from the V-Mount on the BRAIN or rear module.
 3. Remove the REDMOTE.
TURN ON THE REDMOTE
When docked, the REDMOTE automatically turns on when the camera is turned on.
Slide and hold the Power/Key Lock switch in the down position for two (2) seconds, then release.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F |   1 6 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents