D Lens Mounts And Lenses; Lens Mounts - RED EPIC-M DRAGON (Carbon Fiber) Operation Motion

EPIC/SCARLET OPERATION GUIDE
D

LENS MOUNTS

AND LENSES
LENS MOUNTS
This section describes camera lens mounts. Camera mounts may be configured with 19mm rods to accommodate
most cinematography lenses, matte boxes, and follow focus systems.
RED MOTION MOUNT
The RED® MOTION MOUNT® is a revolutionary and adjustable lens mount system for your camera. By integrating a
global shutter, temporal anti-aliasing soft shutter, and variable neutral density (ND) system into a single lens mount, the
MOTION MOUNT delivers on-the-fly shutter adjustments to reduce motion blur and temporal aliasing. The ND filter
also includes a linear polarizer and IR filter for improved image color and contrast.
For more information, see the
NOTE: HDRX is not availabe when the MOTION MOUNT Shutter Type is set to Soft or Square.
REMOVE A LENS MOUNT
NOTE: You can change lens mounts in the field. However, RED® recommends that you change lens mounts only in a
dust-free environment.
REQUIRED TOOLS: T20 TORX® driver
1. Turn off the camera.
2. Attach the camera to a stable platform or position the camera on a clean and level work surface so that the lens
mount screws are accessible.
3. Remove the lens and any camera modules, cables, or other accessories that might interfere with removing the lens
mount.
4. If removing the DSMC Mg PL Mount 2.0, turn the locking ring slightly counter-clockwise so that you can acess the
lens mount screws.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
MOTION MOUNT Operation Guide, available at www.red.com/downloads.
9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F | 2 3 1