Adaptor Modules - RED EPIC-M DRAGON (Carbon Fiber) Operation Motion

EPIC/SCARLET OPERATION GUIDE

ADAPTOR MODULES

This section describes the adaptor modules.
Figure: Module Adaptor (left) and +1 Adaptor Module (Right)
Adaptor modules enable you to connect other modules to the camera for expandable functionality. The +1 Adaptor
Module provides an auxiliary power port for accessories and an additional EVF/LCD port for additional monitor
viewing and output.
Both adaptor modules also offer additional 1/4-20 mounting points on top for configuration support. Most modules
require a Module Adaptor or +1 Adaptor Module to attach to your camera.
For more information, go to
WARNING: The Module Adaptor is NOT compatible with the +1 Adaptor Module.
WARNING: The +1 Adaptor Module IS NOT compatible with the Module Adaptor.
WARNING: DO NOT use the EVF/LCD port if a Pro I/O Module is connected to the camera.
RED offers the following adaptor modules:
ITEM
Module Adaptor
1
+1 Adaptor Module
1. The +1 Adaptor Module requires that your camera is on firmware v4.08 or later.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
"Configure Your Camera" on page 42.
PART NUMBER
720-0008
720-0018
9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F | 1 9