Set Up Audio; Audio Input (Source) Options - RED EPIC-M DRAGON (Carbon Fiber) Operation Motion

EPIC/SCARLET OPERATION GUIDE

SET UP AUDIO

To set up audio, go to Menu > Settings > Audio, and adjust the input, pre-amplifier, headphone, and mix settings.
Figure: Audio Menu

AUDIO INPUT (SOURCE) OPTIONS

Source Name
NONE
CAM ANALOG
PRO I/O ANALOG
PRO I/O AES A
PRO I/O AES B
NONE
Select NONE to disable recording audio.
CAM ANALOG AND PRO I/O ANALOG (MICROPHONE)
The camera provides two (2) microphone jacks for recording two (2) channels of microphone level analog audio. The
Pro I/O Module provides two (2) XLR connectors for recording two (2) additional channels of microphone level audio.
The sensitivity of the microphone and the pre-amp gain determine the recording level of the microphone input.
PRO I/O ANALOG (LINE IN)
The Pro I/O Module provides two (2) XLR connectors for recording two (2) channels of line level analog audio. Line
input passes without gain through the system. The signal provided by the field production mixer or other external line
level source determines the recording level of the line input.
NOTE: Line level audio is only available via the Pro I/O Module.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
Channel Pairs
N/A
Ch1/Ch2, Ch3/Ch4
Ch1/Ch2, Ch3/Ch4
Ch1/Ch2, Ch3/Ch4
Ch3/Ch4
Module Connectors
N/A N/A
BRAIN MIC-1, MIC-2
Pro I/O Module AUDIO 3, AUDIO 4
Pro I/O Module AES
Pro I/O Module AES
9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F | 1 5 3