Display Modes - RED EPIC-M DRAGON (Carbon Fiber) Operation Motion

EPIC/SCARLET OPERATION GUIDE
GIO SCOPE
Displays a color overlay on top of a desaturated image, identifying the 16 stops of light within the full dynamic range
®
of the RED DRAGON sensor.
On cameras with the MYSTERIUM-X
the top and bottom stops.
When enabled, the "G√" indicator displays in the Lower Status Row. The Gio Scope indicators are based on RAW
data. The RGB settings (settings in the Look menu) DO NOT affect the indicators.
Each number indicates a different stop of light.
11: Represents mid-grey.
16: Represents the top stop, and is broken up into 1/8th increments to show highlight roll-off. Each 1/8th stop is
represented by a different shade of red, ranging from light red (less light) to dark red (most light).

DISPLAY MODES

Display mode options include: Magnify, RAW, and Horizon.
MAGNIFY
Displays the central region of the sensor in 1:1 pixel resolution. When enabled, the 1:1 text in the Lower Status Row
turns green, and the AF Window and the magnified region display. The AF Window determines the center point of the
magnified region. If the lens or lens mount is not capable of autofocus with the camera, use Confirm mode to turn on
the AF Window. Sharpening is disabled when 1:1 magnify is enabled. The camera automatically exits magnify mode
when recording begins.
The Magnify tool magnifies a 1920 x 1020 region, centered on a 1920 x 1080 display. If the resolution is lower than
1920 x 1020, the image border cannot be magnified. Use the following equations to determine the area of the image
border that will not be magnified:
Border width: (1920 – W) / 2
Border height: (1020 – H) / 2
NOTE: Frame rate and resolution cannot be modified in Magnify mode.
RAW
When enabled, the camera displays images unaffected by the RGB settings (settings in the Look menu). RAW affects
the video recorded via HDMI or HD-SDI to an external recorder. RAW image parameters DO NOT affect image
metadata; the parameters only affect the monitor output. The word RAW displays in the Histogram in the Lower Status
Row.
The RAW image parameters are:
Color Space: REDcolor2
Gamma Space: REDlogFilm
White Balance: 5600K
ISO: 800 ISO
Tint: 0 Tint
NOTE: In RAW mode, the following controls are disabled on all cameras: color temperature, tint, saturation, RGB
gains, ISO, contrast, brightness, shadow, flut, exposure compensation, LGG controls, RGB curves, and luma curve.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
®
sensor, you can still select up to 16 stops. However, the camera will not detect
9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F | 8 5