Upgrade Redmote Firmware - RED EPIC-M DRAGON (Carbon Fiber) Operation Motion

EPIC/SCARLET OPERATION GUIDE
REDMOTE item Description
Recording Frame Current frame capture rate
Rate
Project Time Base Current project time base
Clip Filename Filename of the current clip or next clip to be shot
Histogram RGB Histogram
Model EPIC or SCARLET
Media Status Media location and remaining media capacity %
RAW Clip Meter RGB sensor RAW clipping status
Timecode Current timecode value
Battery Indicator Displays battery life or charge status of REDMOTE
Audio Meter Audio input selection and levels
Power Status Indicates DC supply voltage or % of remaining battery capacity including current supply
voltage
Camera ID Displays camera ID
Wireless Status Displays signal strength when connected wirelessly

UPGRADE REDMOTE FIRMWARE

This section describes the REDMOTE firmware upgrade process using Mac
UPGRADE REDMOTE WITH CAMERA
When you dock a REDMOTE, the camera checks to see if the REDMOTE is running the latest firmware. If the
REDMOTE firmware is slightly outdated, you have the option to update the REDMOTE firmware through the camera. If
REDMOTE firmware is severely outdated, you will be instructed to install updates via USB.
NOTE: The REDMOTE and camera must be re-paired after upgrading camera firmware.
UPGRADE REDMOTE (MAC)
This section describes the REDMOTE firmware upgrade process using a Mac.
INSTALL REDMOTE UPGRADE UTILITY (MAC)
The REDMOTE Upgrade Utility enables you to upgrade REDMOTE firmware from your computer.
1. Download the REDMOTE Upgrade
2. Uncompress and open the zip file.
3. Open the REDMOTE_Upgrade_Utility folder.
4. Open the Mac folder.
5. Open REDMOTE.dmg.
6. Open REDMOTE Upgrade Utility.
C O PYR I G HT © 2 0 1 6 R ED.C O M , I NC
Utility, available at www.red.com/downloads.
® ®
, Windows , and the camera.
9 5 5 - 0 0 2 0 _V 6 .3 , R EV - F | 1 6 6