Computer Operation - LifeSpan SM-400 Owner's Manual

BUTTONS:
1. MODE:
a. Press "Mode" for selection, or enter after setup.
2. SET:
a. Press to set value of TIME, DISTANCE, CALORIES and PULSE.
3. RESET
a. Press to reset a particular function. Hold for down for 2 seconds for a full reset. Placing
the batteries will also result in a full reset.
4. RECOVERY
a. Heart rate recovery function after workout.
FUNCTIONS:
1. SCAN
a. Displays all functions from RPM - SPEED - DISTANCE - CALORIES - PULSE
2. RPM
a. Revolutions per minute. The display will cycle between RPM and SPEED every 6
seconds.
3. SPEED
a. Displays current speed with a maximum speed of 99.9km/h
4. TIME
Count up – No pre-set target. Time will count up to a maximum of 99:59 in 1 second
a.
increments.
Count down – Pre-set target. Time will count down from the pre-set figure to 00:00. The
b.
pre-set value can be set between 01:00 to 99:00.
5. DISTANCE
a. Accumulates total distance from 0:00 to 99:99 km. The user may pre-set the target
distance by pressing SET button.
6. CALORIE
a. Accumulates calories consumed from 0 to 9999 calories.
7. PULSE
a. PULSE can be pre-set using the SET button

6. COMPUTER OPERATION

13
EXER-57