Benefit
Note
Setting
Effect
Special displays
Setting
Effect
Special displays
Note
48/166
Siemens Building Technologies
HVAC Products
Actual values
•
Display of the actual room temperature
•
Display of the actual outside temperature
All displays of actual values require the respective temperature detectors.
3.16
Actual value of the room temperature
1. Press the operating line selection buttons to select line 18.
2. No setting can be made with the + / - buttons.
Display
0...50 °C
The temperature measured with the room unit will automatically be displayed on this
line.
– – –
Sensor with open-circuit or no room sensor connected
0 0 0
Sensor with short-circuit
3.17
Actual value of outside temperature
1. Press the operating line selection buttons to select line 19.
2. No setting can be made with the + / - buttons.
Display
- 50... + 50
The temperature measured with the outside sensor will automatically be displayed on
this line.
– – –
Sensor with open-circuit or no sensor connected
0 0 0
Sensor with short-circuit
For resetting the attenuated outside temperature to the actual room temperature, refer
to page " Attenuated outside temperature".
Basic Documentation RVA47.320
Description of the enduser settings
Unit
°C
Unit
°C
CE1P2379E
15.07.2002