2. step
3. step
4. step
14/166
Siemens Building Technologies
HVAC Products
•
Check to ensure the fixing levers
are turned inward
•
Check to make certain there is
sufficient space between the front
panel and the fixing levers
•
Slide the unit into the panel cut-out
without applying any force
Note:
Do not use any tools when inserting
the unit into the cut-out. If it does not
fit, check the size of the cut-out and
the housing.
•
Secure the fixing levers by
tightening the two screws on the
front of the controller.
Note:
Tighten the screws only slightly .
When tightening the screws, the
fixing levers automatically assume
their correct positions.
Basic Documentation RVA47.320
Handling
2379Z12
2379Z13
2379Z14
2379Z14
CE1P2379E
15.07.2002